Print 

IEC61511 Functional Safety (DE0106)

Category
Process and Machinery Industry
Dates
Monday, 17 May 2021 10:00 - Thursday, 20 May 2021 14:00
Venue
Prof.-Messerschmitt-Straße 1, 85579 Neubiberg, Germany
Email
This email address is being protected from spambots. You need JavaScript enabled to view it.
Instructors
Christian Krupke
Type of training
Online
Brochure
de0106-flyer-iec61511-training
.pdf

Functional Safety - Analysis, Design and Operation acc. to IEC 61511

 

Who should attend:

  • Managers who need to know more about functional safety and the standard IEC 61511
  • Quality Management Representatives who are responsible for fulfilment of IEC 61511
  • Process (safety) engineers, design engineers, control engineers, reliability engineers, application engineers and operators working on the development, testing and operation of safety instrumented systems

Course topics:

DE0106 (DAYS 1 & 2)

  • Introduction to Safety Instrumented Systems
  • Principles of Risk Management
  • The Safety Lifecycle
  • Process Hazard Analysis (PHA)
  • Consequence Analysis
  • Likelihood Analysis
  • Layer of Protection Analysis (LOPA)
  • Tolerable Risk
  • SIL Target Selection
  • Safety Requirements Specification (SRS)

DE0106 (DAYS 3 & 4)

  • Safety Instrumented Systems (SIS) failure
  • From failure rate to SIL
  • Single devices to system
  • Redundant Architectures
  • Requirements to SIF
  • SIF Design and Verification in the Safety Lifecycle
  • SIF Detail Design
  • Operations
  • FSP exam
For more details about the course topics, download the brochure on the top of the page
 
Duration: 4 days

Schedule: 1st day 10.00 - 17.00; 2nd day 9.00 - 17.00; 3rd day 9.00 - 17.00; 4th day 9.00 - 14.00

Language: German or English, training material will be in English

Location:
                  exida.com GmbH office
                  Prof.-Messerschmitt-Straße 1
                  D-85579 Neubiberg / Germany

Alternatively, you can also book this training as In-house training.

Certificate: each participant gets a letter of attendance. After the end of the 4th day there is a
                      possibility to do the FSP exam. This is optional and free of charge. An CFSE/P exam will
                      be given on the 5th day of the training week. This is also optional.
                      For more information, please follow this link: http://www.exidacfse.com/